WorkbenchMFT

Lesson 2 – shelves, glue up and finish

In this lesson we look at options for cutting out the profile in the shelves, glue the clamp rack together, apply the finish and stand back and admire our work.

Lesson 1 – Introduction, stock & joinery

In this lesson we look at the design, prep the stock, cut the joinery and profile the side and centre panels. The plans are available under the materials tab at the top of this page.

Lesson 1 How to calculate your hourly rate.

In this lesson we look at a simple framework that you can use to work out your hourly rate. NOTE: in the video I do make an error as I calculate the available days, this was due to a formula error in the spreadsheet. This is now fixed.

Adding stock guides

In this lesson, we look at adding the Jessem Cleat cut stock guides the router table fence

Fitting the Incra Fence

In this lesson, we look at adding the Incra Fence to the MFT top with a quick and easy shop made ‘speed plate’

Scroll to Top
Scroll to Top